Controls And Automation Engineer

Industries: FMCG, Consumer Goods, Food & Beverage, Packaging, Pharmaceutical, Chemical, Industrial Manufacturing, Automation.
Locations: Phoenix, Tempe, Mesa, Chandler, Tucson, AZ + candidates open to onsite

• Provide support for installation, commissioning, start-up, and troubleshooting for various control and automation projects.
• Design Control System Architecture (CSA).
• Design electrical & control panel layout, control schematic drawings, and Bill of Materials (BOM).
• Design, review, and perform safety validation, safety maps, IQ/OQ, and documents for new equipment installation at site.
• Review vendor & engineering documents as per project requirements.
• Provide support for PLC and HMI programming.
• Development and Modification of PLC program.
• Development of SCADA project as per customer needs.
• Integration of Equipment system in the Plant.
• Support the operations team for the existing system.
• Work with Project/Engineering team for new system.
• Design feasibility study, design basis document and detailed engineering technical documents Cable schedule, Device List/ Tag List for new equipment / machine.
• Understand the electrical drawings, P&IDs.
• Perform Yellow lining, IQOQ, troubleshoot electrical circuits.
• Understand the existing control system and provide support to reduce the current losses.
• Design control study / URD (User Required Document) for the PLC & HMI programming.
• Understand and Integrate Different systems in the plant.
• Help the team understand the cause of loss based on historical data.
• Design and review technical documents, such as engineering information, for the fabricator/contractor's activities to be performed in sequence at the site for site clearance and new installation.
• Deliver complex, large-scale projects on time and within the budget in compliance with NEC, NFPA79, OSHA, S88, and PackML Standards.
• Perform multi-discipline and vendor coordination for new equipment installation.

• PLC & HMI Programming: Rockwell Software - Studio5000 & RSLogix5000, FTView Machine Edition and Site Edition, Connected Component Workbench
• Wonderware, Archestra
• FT Batch
• Plant PAX, PackML, PackTag, Upack & OPERA Programming's standards
• Control Hardware: Rockwell PLCs e.g. GuardLogix, ControlLogix, CompactLogix, SLC500, MicroLogix, PLC5, PanelView Plus HMIs, Point I/O, PowerFlex 520, 750 Series VFDs, Power Flex 7 Class, PowerFlex 4 Class